ERGOFRESH



A single welding operator can produce up to 40 grams of airborne fumes and particles per hour. Worker safety is a very important trend in the welding industry that is expected only to grow. The new ERGOFRESH is our answer to the demand for better safety. With the ERGOFRESH fume extraction MIG torch, a welder and their colleagues will breathe clean air rather than the fumes created during the welding process. The extraction efficiency for all ERGOFRESH models has been measured according to new standard ISO 21904. Under this standard, 94% of welding fumes are removed directly as they are generated—and long before they reach the welder’s breathing area.

Ergonomics

In addition to enjoying clean air, the ERGOFRESH guarantees premium ergonomics The natural position of the human hand has been the leading principle in designing the handle of the ERGOFRESH from start to finish.

Trigger

The ERGOFRESH trigger solution has been fitted with a sealed microswitch trigger. It is more reliable than the alternative mechanical solution which has an open contact exposed to dirt, dust, and humidity. The micro switch is IP67 protected, a much higher standard than other electrical components on welding systems, ensuring a long lifetime of reliable use.

ERGOFRESH 200G
ERGOFRESH 350G
ERGOFRESH 300W
ERGOFRESH 500W

Consumables

Robustness and excellent performances


The ERGOFRESH is compatible with ERGOPLUS torch consumables (excludes the gas nozzle).
The ERGOFRESH gas nozzle and vacuum nozzle combination is patent pending. The gas nozzle and vacuum nozzle can be replaced separately.
All the products fulfill the requirements of ISO 21904 (welding without vacuum nozzle must be prevented).

Ergonomics and user experience

Hose package



The hose package consists of a vacuum hose covered by leather. Leather is the most durable material against sharp edges and corners. It ensures that the vacuum hose does not get damaged and provides smooth movement of the hose as the welder goes about their work. The flexible vacuum hose is connected to the handle by a ball joint whose special structure is designed to avoid leakages.






Usability



One of the key features in the ergonomic design of the ERGOFRESH is the detachable pistol grip handle. When welding using the traditional handle, the welders’ shoulder and elbow muscles are under the constant stress of the workload. With the pistol grip handle the shoulder and elbow position is completely different and the muscle strength load is 25–64% lower depending on the welding position (EMG-measurements made by an independent specialist company- Myontec). The pistol grip is designed to be easy detachable with one click and no tools needed. Due to its small size, the pistol grip can easily be carried in the welders’ pocket. The pistol grip is included in every standard torch sales package.


Ergonomics and user experience

Hose package



The hose package consists of a vacuum hose covered by leather. Leather is the most durable material against sharp edges and corners. It ensures that the vacuum hose does not get damaged and provides smooth movement of the hose as the welder goes about their work. The flexible vacuum hose is connected to the handle by a ball joint whose special structure is designed to avoid leakages.

Usability



One of the key features in the ergonomic design of the ERGOFRESH is the detachable pistol grip handle. When welding using the traditional handle, the welders’ shoulder and elbow muscles are under the constant stress of the workload. With the pistol grip handle the shoulder and elbow position is completely different and the muscle strength load is 25–64% lower depending on the welding position (EMG-measurements made by an independent specialist company- Myontec). The pistol grip is designed to be easy detachable with one click and no tools needed. Due to its small size, the pistol grip can easily be carried in the welders’ pocket. The pistol grip is included in every standard torch sales package.

Connections

The ERGOFRESH torch is equipped with the euro connector as standard.
Trafimet’s water connector hose solutions are one of the most remarkable results of the company’s R&D work in the field of connectors. The material used in its designs has been updated to EPDM, which is more flexible and durable than previous hose material. The inner structure of the rear box has also been redesigned to avoid any kinking in the water hoses.

The special designed Y-Connector for the vacuum unit, rotates freely in 360°. The standard vacuum connector diameter is 50 mm and adapters for 45 mm and 60 mm are available as accessories.

Technology

The ERGOFRESH handle is equipped with a bypass lid. The lid is located under the welder’s thumb when they are holding the torch by the standard handle. The bypass lid is particularly needed when welding in tight inner conners where there is a risk of inadvertently vacuuming the shield gas away along with the fumes. With effortless use of the bypass lid, the welder can adjust the amount of vacuum when needed and thus avoid possible welding defects.

AIR COOLED MIG TORCHES

ERGOFRESH 200G

ERGOFRESH 350G

WATER COOLED MIG TORCHES

ERGOFRESH 300W

ERGOFRESH 500W

Managed and coordinated by Kemppi Group Oy

Via del lavoro 8, 36020 Castegnero Vicenza - Italy
CF. e P.IVA 06273010964
Share Capital € 6.920.000 paid in full

© Trafimet Group Spa a socio unico. All rights reserved.
Powered by Websurfers.

Products

Follow Us

Privacy Policy
Cookie Policy