TRAFIMET FUME EXTRACTION SYSTEM

Health in the workplace

The Trafimet fume extraction system is the most efficient and convenient way to safeguard the welding operators’ health.
Compared to the classical solutions, our fume extraction system cares also of the envioronment respect, thanks to high energy savings.
100% a Green System!
The range consists of 15 torches, 3 fume vacuum extractors and a full set of accessories suitable for any operational needs.

icona salute-prima-di-tutto Aspirazione fumi di saldatura

Health first of all

It is stated that the welding fumes can cause serious health problems for workers if inhaled. The Trafimet fume extraction system guarantees almost complete vacuum system capturing fumes, ensuring a TLV of -1.7 1.5 mg/min.
icona risparmio-energetico Aspirazione fumi di saldatura

Energy saving

The Trafimet fume extraction system requires only 1 kWh every 8-hours work (tested with T350 torch with Ø 1.0/1.2 wire), allowing energy saving by over 95%, compared to the traditional systems.
icona ritorno-economico Aspirazione fumi di saldatura

Economical saving

The Trafimet fume extraction system, connected to the T350 torch, consumes only 80 m3h/, granting a significant savings in heating or air conditioning costs. The fume suction cones of the Trafimet torches also protect the welding bath from air currents, with a reduction of the protection gas flow of 1/4 compared with standard torches.
icona salute-forti Aspirazione fumi di saldatura

Healthier is stronger

The tests performed with the Trafimet fume extractor system confirm that the smoke concentration in the breathing zone is between 1.5 and 1.7 mg/m3. This is certainly a guarantee for the health of the operator: increasing of blood oxygenation, less fatigue, therefore a better quality of life in the workplace.

FCT – FLUX CONTROL TRAFIMET

The FCT system: excellent welding quality!

The FCT Torches are fitted with the Trafimet Flux control system. Through this system the operator can adjust the depression by pressing an additional handle button.
The FCT system is required when you are welding in corner or narrow places, to avoid air floating that might disturb the shield gas.
By pressing the FCT button, the anspirator stops (or close the vents in the case of centralized suction). The FCT system ensures excellent weld quality having the suction control in all circumstances.

LIGHT AND HANDY

The new Trafimet anspiration torches grant more performances and at the same time are handier and more ergonomic.

Our R&D especially focused on creating a very small handle with rotating metal joint that guarantees excellent grip and less effort. The new cable and the new outer hose are more performant, softer and handier.

TURBOPLUS WELDING TORCHES FOR THE SUCTION OF WELDING FUMES

TURBOPLUS T 250A
X100% – 250A CO2
X100% – 225A Mix

TURBOPLUS T 350A
X100% – 350A CO2
X100% – 310A Mix

TURBOPLUS TR 400A
X100% – 400A CO2
X100% – 350A Mix

TURBOPLUS TR 480A
X100% – 480A CO2
X100% – 420A Mix

TURBOPLUS 480R AUT
X100% – 420A CO2
X100% – 380A Mix

EXTRAPLUS WELDING TORCHES FOR THE SUCTION OF WELDING FUMES

EXTRAPLUS 25
X100% – 250A CO2
X100% – 225A Mix

EXTRAPLUS 36
X100% – 350A CO2
X100% – 310A Mix

EXTRAPLUS 500
X100% – 500A CO2
X100% – 450A Mix

CYCLONE SYSTEMS AND BALANCED ARMS

CYCLONE 2/0.9 kW

CYCLONE 2/1.8 Kw

CYCLONE 3/3.0 Kw

CYCLONE 3/4.0 kW

CYCLONE 3B/3.0 kW

BALANCED ARMS

GIANT BALANCED ARMS

DISCOVER MORE ABOUT THE TRAFIMET FUME EXTRACTION SYSTEM

Lern more technical features about the TURBOPLUS and EXTRAPLUS torches combined with the CYCLONE aspirators.

Fill in the form to get more information or a quotation >>

Country *