
The innovative eye protection system for welders T-LINK® represents a new frontier for the safety of the welder and is the only commercially available auto-darkening system that guarantees total eye protection during welding.

BLUETOOTH® TECHNOLOGY FOR SECURITY
With T-LINK® the filter is activated prior to the welding arc
The T-LINK® system is based on the continuous communication between the welding torch and the auto-darkening mask, which is handled with Bluetooth® technology.
When the trigger is pulled, a Bluetooth® signal is sent to the LCD screen filter, which responds by getting dark a moment before the arc is activated.
Simply brilliant
The T-LINK® protection takes a few moments
SAFETY IN ALL CONDITIONS

In carpentry or shipyard welding, it may occur that a structure element inadvertently covers the filter sensors. This causes the filter opening and the resulting irradiation in the operator’s eyes. With the eye protection system for welders T-LINK®, on the contrary, during welding the filter remains obscured to guarantee total safety for the welder.
DYNAMIC OPENING DELAY

The eye protection system for welders T-LINK® is able to automatically determine the opening time of the filter, depending on whether the operator is making a short (spot welding) or a long welding. The T-LINK® system thus guarantees the maximum eye protection and an excellent operating speed.
MAXIMUM EFFICIENCY IN TIG LOW AMPERAGE WELDING

During low amperage TIG welding the arc is so small that the standard optical sensors don’t detect it easily. The typical consequence is the classic filter flicker, which makes the operation very difficult. The T-LINK® system is sensitive to the passage of current in the welding circuit, thanks to this the filter always remains active.
CUSTOMIZED MANAGEMENT OF THE “STANDBY TIME”
The “STANDBY TIME” is a feature that allows the T-LINK® system to adapt perfectly to the different MIG / MAG and TIG welding modes, 2 and 4 stroke and in general, to all the parameters set on the generator, such as the ascent ramp time, pregas time and all other settings that may delay the passage of current. Thanks to this feature, once the torch button is pressed, the filter becomes obscured and remains obscured for the set standby time, regardless of the current passage.

No more exposure to weld flashes
The reaction time of standard filters, however fast, still exposes the eye to artificial optical radiation. In spot welding, this “microflash” multiplies for hundreds or thousands of times a day.
T-LINK® is the right choice to protect the health of welding operators.
Compare the exposure time to artificial optical radiations to which a welder is exposed using T-Link® Filters or using standard filters. Look at the table.
DISCOVER THE 4 SECURITY CONFIGURATIONS
The T-LINK® system is offered in 4 different configurations to provide total safety for all welding operators.
Configuration with MIG/MAG torch adaptor

with T-LINK® adaptor


This configuration is designed for those who want to upgrade their MIG/MAG EURO connection torch to the T-LINK® system.
Simply connect the T-LINK® adaptor between the generator and the torch in use and combine it with the T-LINK® filter on the mask.


EURO MIG/MAG
T-LINK® adaptor

T-LINK® Mask

T-LINK® Filter
Configuration with TIG torch adaptor

with T-LINK® adaptor


This configuration is designed for those who want to upgrade their TSK50 connection TIG torch to the T-LINK® system, for greater safety at work.
Simply connect the T-LINK® adaptor between the generator and the torch in use and combine it with the T-LINK® filter on the mask.


TSK50 TIG
T-LINK® adaptor

T-LINK® Mask

T-LINK® Filter
Configuration with Trafimet MIG/MAG T-LINK torches



This solution is designed for professionals who prefer the T-LINK® system directly integrated into the torch.
The Trafimet range of T-LINK® MIG/MAG torches communicate directly with the T-LINK® filter, combining maximum eye protection with the best welding results.

Configuration with Trafimet TIG T-LINK torches



This solution is designed for professionals who prefer the T-LINK® system directly integrated into the torch.
The Trafimet range of T-LINK® TIG torches communicate directly with the T-LINK® filter, combining maximum eye protection with a torch constructed with the highest care in the selection of materials, components and finishes.


T-LINK® Mask
TIG T-LINK® Adapter Configuration with Connection KIT
The TIG T-LINK® adapter connects to any generator and TIG torch through a Connection KIT, supplied separately.
The connection KIT is realized ad hoc on the specific connections of your generator and your TIG torch.
