
The innovative T-LINK® system represents a new frontier for the safety of the welder and is the only commercially available auto-darkening system that guarantees total eye protection during welding.

BLUETOOTH® TECHNOLOGY FOR SECURITY
With T-LINK® the filter is activated prior to the welding arc
The T-LINK® system is based on the continuous communication between the welding torch and the auto-darkening mask, which is handled with Bluetooth® technology.
When the trigger is pulled, a Bluetooth® signal is sent to the LCD screen filter, which responds by getting dark a moment before the arc is activated.
Simply brilliant
The T-LINK® protection takes a few moments
SAFETY IN ALL CONDITIONS

In carpentry or shipyard welding, it may occur that a structure element inadvertently covers the filter sensors. This causes the filter opening and the resulting irradiation in the operator’s eyes. With the T-LINK® system, on the contrary, during welding the filter remains obscured to guarantee total safety for the welder.
DYNAMIC OPENING DELAY

The T-Link® system is able to automatically determine the opening time of the filter, depending on whether the operator is making a short (spot welding) or a long welding. The T-Link® system thus guarantees the maximum eye protection and an excellent operating speed.
MAXIMUM EFFICIENCY IN TIG LOW AMPERAGE WELDING

During low amperage TIG welding the arc is so small that the standard optical sensors don’t detect it easily. The typical consequence is the classic filter flicker, which makes the operation very difficult. The T-LINK® system is sensitive to the passage of current in the welding circuit, thanks to this the filter always remains active.
CONFIGURATION WITH MIG/MAG AND TIG WELDING MACHINE
The T-LINK® system is offered in 4 different configurations to provide total safety for all welding operators.

with T-LINK® board


with T-LINK® filter
Trafimet Group’s proposal to the OEMs is the T-LINK® BOARD, an electronic circuit board to be integrated with the welding generators, and communicating with the T-LINK® filter or mask.
Thanks to this solution, manufacturers can qualify their offer with a complete safety system. The T-LINK® electronic board is available for MIG / MAG and TIG welding generators.


T-LINK® Board

T-LINK® Mask

T-LINK® Filter
